You can tape the holder or screw it wherever you would like, or use the hardware that is mentioned above. To remove the clock pry under the edge of the clock carefully. Moisten the ring around the clock with a water damp cloth. This will allow the clock to slide in place easier. Now turn the clock in the position you like and push it in place inward on the chrome edges of the clock, making sure that the clock is firmly in place. When you insert clock into holder, make sure stem section is inserted first and then continue putting clock in place, by firmly pressing down. For your convenience we have included a spare rubber ring, for around the clock. Please, do not misplace it for later use. * Make sure clock is inserted all the way before riding.
The clock base can be polished with a good aluminum polish or Luster Lace Metal polish. This clock is waterproof, shock resistant and the numbers will glow in the dark. The clock base can be polished with a good aluminum polish or Luster Lace Metal polish. This clock is waterproof, shock resistant and the numbers will glow in the dark. |
Installation Instructions
Tape on Billet clock and hardware Part # TOCS White face and hardware |
Last update 3-7-03
|
Marlin's Motorcycles
Call 1-800-777-5543 http://www.icc-comm.com http://www.marlins-motorcycles.com |
Tape on Billet clock and hardware
|
Tape or screw on Billet clock
|