 |
|
®
|
|
Our timepiece is not just another pretty face
Our clocks will fit on all Motorcycles You do not have to be distracted to tell the time while you drive. And these clocks give you that very special look. |
|
This clock and holder will always
face you. It moves in all directions and the clock can twist around. After you make all your adjustments, lock all the allen screws to keep it in place. |
|
Waterproof You can wash your bike or drive in the rain
Shock resistant Great for that bike that vibrates or goes over 100 MPH Numbers will glow in the dark Easier to read at night Large numbers Easy-to-read A very special clock Show-chrome Citizens Movement |
|
"No one has a clock holder like thiS"
|
|
This part is for Harley Davidson
|
|
|
|
Call to get Free
Wholesale priceing 1-800-777-5543 |
|
Our new thermometers are in stock
|
|
|
|
Fits All Sporsters, FXRS, FXRS-SP, FXRS-CON, FXLR; and Later FXD Dyna Glide Models
If your bike has a small bolt and small washer, that will fit inside 1 1/2" inside diameter that holds on the fork stem, It will take the Fork Stem Billet Clock Small. The bolt that you have might not have a hole in the center. You need to get one from Harley with a hole in the center unless you can drill and tap your own hole. If this is the case you would take the Fork Stem Billet Clock Small 1 3/4" outside diameter. If you have a chrome cap 1 3/4" you take the fork stem billet clock small Part #FSBC1 |
|
The Fork Stem Billet Clock takes the place of the chrome fork stem bolt cap. Our part comes with clock, screw and billet housing. As you can see from the photos, this is a fine addition to your bike. This clock comes in white or black face.
|
|
Clocks
|
|
|
This Fork stem billet clock will fit most metric motorcycles
|
|
NEW FOR 2004 1/2
|
|
|
Parts that come with this set:
Adapter and 3 allen screws FSBC1 Show chrome Choice of clock faces white or black |
|
Our adapter will fit the nut shown to the right. If the nut on your bike is smaller than this nut our adapter will fit that one also. We use different set screws for smaller nuts. If you are not sure what to do call 800/777/5543
|
|
This part is for Harley Davidson
|
|
|
®
|
|
The Fork Stem Billet Clock takes the place of the chrome fork stem bolt cap. Our part comes with clock, screw and billet housing. As you can see from the photos, this is a fine addition to your bike. This fits FXWG, Softails (Except Springers).
Harley has several different style triple trees that our clock will go on. So here is how you can tell. If your bike has a large nut and washer on top or a small bolt with a large washer on your steering stem you will take the Fork Stem Billet Clock-Large 2 1/4" outside diameter. Make sure that the large washer and bolt does not exceed 2" inside diameter. Or look at photo at the right and go by that. Call if you are not sure.1-800-777-5543 |
|
|
|
Last updated 12/03/04
|
|
Marlin’s has a new LED lighting system available for all of our clocks and thermometers. Our lights are unique. You do not have to push a button to make your light go on for just for a few seconds. All you need to do is turn your key, and the light will go on. We have even gone further than that! You can adjust the intensity of the light as much as you would like. Another unique feature is that our lights are available in either red or white LED light. With this LED lighting , we can still have a white or black face on our clocks or thermometers so it will match you gauges.
Our lights will fit on all of our older clock and thermometers . If you are not mechanically inclined you do not need to hard wire our light to your bike, it comes with a 9 V battery case with an on/off switch. |
|
Thermometers
|
|
|
|
|
I HAVE A 2003 BMW R1200C MONTANA. RECEIVED THE CLOCK I ORDERED. I WAS ABLE TO INSTALL THE CLOCK W/LIGHT IN 5 - MINUTES. LOOKS GREAT. THANKS, A GREAT PRODUCT AND WELL NEEDED WHEN CYCLING. FACTOR IN SAFETY AS WELL. IT IS NO LONGER NEEDED TO REMOVE MY EYE SIGHT FROM THE ROAD TO SEE THE TIME, WATCH ON MY WRIST.
THANKS. D. CHRISCOE JR. |
|
Thermometers
|
|
Clocks
|
|
|
You are on page one
|
|
|
Fahrenheit
|
|
You can twist this knob to make the light brighter or dimmer
|
|
Cost $1.50
|
|
Makes the light brighter or dimmer
|
|
Micro-Size Potentiometer $1.50
|
|
Installed with order white light $23.95
|
|
Installed with order red light $19.95
|
|
|
This part # HBC fits on 1" or 7/8" bars
of all makes of motorcycles |
|
This part is show chrome
|
|
This installation is so clean. You see no Screws or allens
|
|
Fork Stem Billet Thermometer, Small.
PART #FSBC1 Black face Cost $69.95 |
|
Fork Stem Billet Thermometer, Small.
PART #FSBC1 White face Cost $69.95 |
|
Fork Stem Billet Clock, Small.
PART #FSBC1 Black face Cost $69.95 |
|
Fork Stem Billet Clock, Small.
PART #FSBC1 White face Cost $69.95 |
|
Installed with order
white light $23.95 |
|
Installed with order
red light $19.95 |
|
Micro-Size Potentiometer $1.50
|
|
Makes the light brighter or dimmer
|
|
Fork Stem Billet Clock, Small
with adapter PART #FSBC1 Black face Cost $84.95 |
|
Fork Stem Billet Clock, Small
with adapter PART #FSBC1white face Cost $84.95 |
|
Fork Stem Billet Thermometer, Small
with adapter PART #FSBC1 Black face Cost $84.95 |
|
Fork Stem Billet Thermometer, Small
with adapter PART #FSBC1 white face Cost $84.95 |
|
To order click on one of thebutton below.
|
|
Fork Stem Billet Clock-Large.
Part # FSBC2 Black face Cost $69.95 |
|
Fork Stem Billet Clock-Large.
Part # FSBC2 White face Cost $69.95 |
|
Fork Stem Billet Thermometer-Large.
Part # FSBC2 White face Cost $69.95 |
|
Fork Stem Billet Thermometer-Large.
Part # FSBC2 Black face Cost $69.95 |
|
Call 1-800-777-5543 to become a qualified dealer
Click here and go on line and fill out a Dealer application. Order forms have retail pricing. Dealer discount will be given at time of order. |
|
|
To order click on one of the button below.
|
|
Handlebar clock 7/8" or 1" Bar
Part Number HBCWhite face Cost $69.95 |
|
Handlebar Thermometer 7/8" or 1" Bar
Part Number HBCWhite face Cost $69.95 |
|
|
Handlebar clock 1" or 1 1/4" Bar Part Number HBCWhite face Cost $79.95
|
|
Handlebar Thermometer 1" or 1 1/4" Bar Part Number HBCWhite face
Cost $79.95 |
|
Handlebar clock 7/8" or 1" Bar
Part Number HBCBlack face Cost $69.95 |
|
Handlebar Thermometer 7/8" or 1 " Bar
Part Number HBCBlack face Cost $69.95 |
|
Handlebar clock 1" or 1 1/4" Bar Part Number HBCBlack face Cost $79.95
|
|
Handlebar Thermometer 1" or 1 1/4" Bar Part Number HBCBlack face
Cost $79.95 |
|
|
Clocks
|
|
Thermometers
|
|
Clocks
|
|
Thermometers
|
|
|
|
Installed with order red light $19.95
|
|
Installed with order white light $23.95
|
|
Makes the light brighter or dimmer
|
|
Micro-Size Potentiometer $1.50
|
|
|
To order click on one of the button below.
|
|
*For Sporstesr that do not have a fork stem nut with a hole in the center you can go to your Harley Davidson dealer and order a bolt . Check and see if this part number will work on your bike. Part # 4453
|
|
|
|
Makes the light brighter or dimmer
|
|
Micro-Size Potentiometer $1.50
|
|
Installed with order white light $23.95
|
|
Installed with order red light $19.95
|
|
|
|
You are on page one
|
|
Marlin Corporation
Call 1-800-777-5543 |
|
Open Accounts For Qualified Dealers
|
|
Please call for wholesale pricing or send E- mail
|
|
|
We Take Visa MasterCard American Express
|
|
Here is a great gift for yourself, or some one you love Click here
|
|
This part is show chrome
|
|
This part # HBC fits on 1" or 1 1/4" bars
It has a clear plastic isolator for the 1" bar |